NOS IBM 5161 expansion unit on ebay
Holly sh.. http://www.ebay.com/itm/NIB-NOS-New-...EAAOSw8w1YBi-q
View ArticleClik here to view.
HP Integral PC (9807A) emulation
I am trying to improve MAME's emulation of IPC (right now it has a "skeleton driver" -- ROM dump and not much else) -- that's not going to be easy (graphics processor is barely documented in HP...
View ArticleFor the love of Wang...
I'm trying to identify an older type "computer" that an aunt of mine had years ago, late 80's, early 90's. I use the term "computer" in quotes, because I'm not sure it was a PC compatible, although she...
View ArticlePETware
One of the things that I've constantly wondered about once I got a PET was what kind of hardware was available for the machine (not new stuff, because flash cards are for pussies) and where the heck is...
View ArticleWang 2243 Drive enclosure
I came across a Wang 2243, which is an enclosure w/ 3 8-inch floppy drives in it for not much $ in the local surplus shop. Is there a demand for something like this whole or is the value in the drives?...
View ArticleClik here to view.
[FS] Serial Mice
I have two more serial mice for sale. Both mice have been cleaned and tested, notes on them are below. HR photo: http://i.imgur.com/HSJWVvG.jpg Microsoft Serial Mouse (P/N:24394) - $15 This mouse has...
View ArticleREQUEST: Image disk, boot disk or install disk of MS-DOS 3.30 / 3.30a / 3.X...
Hello friends of VCFED. I'm starting to restore a PC-XT Turbo with a NEC V20 microprocessor and RLL hard disk. The problem is that the hard disk was badly damaged and could not make a backup copy of...
View ArticleCreating Physical TRS-80 Floppies From Disk Images
I'm trying to create TRS-80 floppies from my Dell XPS 8700 (Core i7) PC using .dsk files downloaded from the Internet. I have a hardware board known as Kryoflux installed. What I'm doing is using the...
View ArticleJameco JE664 EPROM Programmer
I picked up a Jameco JE664 EPROM programmer about 10 years ago. It didn't come with a manual or software and at the time I couldn't find either. Searching now all I see on the Net is my 10 year old...
View ArticleExabyte 8705/Eliant 820 Tape Drive Help
Hello all! A while back, I got an Exabyte 8705 Tape drive for free. I have had it for a while, but never really got around to trying to use it. Anyway, I finally got a SCSI card yesterday, and it all...
View ArticleClik here to view.
Olivetti Prodest PC1 db9 video connector
Hello, has anybody the pinout of the DB9 video connector of Olivetti Prodest PC1 XT class homecomputer? I have now one and I thought it is just CGA/EGA so I can connect my NEC Multisync CRT, swith it...
View ArticleHP 200LX and software oddities
So I managed to acquire an HP 200LX palmtop. Always wanted one of these. I also have put a 12bmb memory card in it. For the most part it works really well. However, I have noticed some issues with some...
View ArticleClik here to view.
Corona Data Systems PC-22H video and keyboard?
One of these came in today and I'm not getting any video from it nor do I see where a keyboard would connect. Perhaps the video connector isn't compatible with an IBM color display or the internal DIP...
View ArticleDisplaying video on VAXStation 3100/38
I have been banging my head on this one for a week now. I have four VAXstation 3100/38s here that I need to send on to where they can be used. Yes, we need to use them for now. My problem is I can't...
View ArticleClik here to view.
Help accessing files from circa 2001 hard drive
Last week I posted the following: "Need help getting data from a CMS backup hard drive with a 68 pin female pcmcia card" on the Vintage Computer Hardware forum with a couple of pictures of the CMS...
View ArticleProfessional 350 ROM dumps
I have someone asking if I could dump the ROMs in my 350 which looks to require socket adapters as they consist of a MK36C25N and MM52164 and my Willem as-is accepts neither. Has anyone dumped the ROMs...
View ArticleClik here to view.
Sad end to a cool machine.
A while ago I bought this cute little SE/30 for cheap. I knew it was going to be a resto project and probably didn't work as-is, but I had my hopes up for it. I've never had a compact Mac and damnit,...
View ArticleClik here to view.
Debugging a KIM-1 computer
Hi On a suggestion from another friend, I'm starting a new thread rather than continuing an older thread started by another. I've been debugging my KIM-1 and while doing so, hopefully helping others....
View ArticleS-100 Boards For Sale
From time to time, I see folks here on the Forum asking about availability of S-100 boards, so... I have: Compupro CPU-Z (Z-80 CPU board) - SOLD Compupro RAM 17 (64K static RAM Board) - SOLD...
View Article