Tried over on cctlk, but didn't get any replies so I thought I'd try here.
Does anyone have the documentation for the 80286 version of iRMX 86, aka iRMX II
or versions for the 286 or 386 later than iRMX 286 Rev 6.0?
I've been doing a bunch of work on getting Rev 6.0 going again on a SYP310 and have
a lot of documentation for iAPX 86 revs 1-6 (except the rev 6 installation manual.. grr..)
but nothing much for 286.
Mostly going crazy right now trying to make a bootable 8" floppy for an older 86/330 system
which I think should be possible if I knew a little more about hardware configurations. Rev 6
seems to be the first one to support the 286 and 214 disk controller, but there isn't much in
the documentation I have that says if you can take the 8086 version in the 5" floppy distribution
kit and boot it on the older 86/30 215 8" configuration in the 86/330
Does anyone have the documentation for the 80286 version of iRMX 86, aka iRMX II
or versions for the 286 or 386 later than iRMX 286 Rev 6.0?
I've been doing a bunch of work on getting Rev 6.0 going again on a SYP310 and have
a lot of documentation for iAPX 86 revs 1-6 (except the rev 6 installation manual.. grr..)
but nothing much for 286.
Mostly going crazy right now trying to make a bootable 8" floppy for an older 86/330 system
which I think should be possible if I knew a little more about hardware configurations. Rev 6
seems to be the first one to support the 286 and 214 disk controller, but there isn't much in
the documentation I have that says if you can take the 8086 version in the 5" floppy distribution
kit and boot it on the older 86/30 215 8" configuration in the 86/330